Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Asphalt- Alternatives for the asphalt surface in Bullhead City, Arizona


Asphalt installed on an unstable surface can quickly lead to problems. There are 3 Chief options for the basic installation:

  1. Paving Over Existing Driveway: If your current driveway is in good shape rather than showing serious fractures or crumbling, hot asphalt mix can be placed directly within your driveway. One facet is height: make sure fences, garage floors, and other constructions aren't compromised by the greater level of this new surface.
  2. Remove old driveway, peg to the floor: The present driveway is completely removed (or you might not have a driveway nonetheless ) and 4 to 6 inches of warm paving stone is put directly on the ground.
  3. Remove the old driveway and secure it into a good surface. This is actually the preferred method. An aggregated stone flooring partly replaces part of the hot asphalt mix.

Our Services:

The best time to install Asphalt in Bullhead City

The more asphalt you operate, the more leeway you have. For instance, at 40 F, the crews only have 16 minutes to work on 1 1/2 inch thick asphalt. In general, for thin asphalt applications (approximately 1.5 cm), you need to wait until temperatures are 21 ° C or even higher. Between 50 and 60 F, then you ought to consult with your contractor. The hot mix remains practical during this period of time, but the time is limited.

How much does an Asphalt price in Bullhead City?

Consider the weather vagaries of our climate when choosing the quality of asphalt. The substantial temperature variations we experience cause considerable damage to asphalt work.

In addition, it will be useful to tell the contractor should you own a recreational vehicle or a van. He might have to accommodate the asphalt mix in order to be more resistant to the weight of heavy vehicles.

The advantages of Asphalt

  • Smooth finish;
  • non invasive
  • Simple to Keep
  • watertightness ensured
  • withstands the rigors of this Quebec climate quite well (provided it's been set up optimally);
  • prevents the growth of moss;

It will cost you between $ 3 and $11 per square foot; the price varies depending on the characteristic of the asphalt employed along with the paving contractor.

For a sustainable Asphalt

The existence of an asphalt paver may be up to 20 years, when the very best states are met. We're referring to a professional paving contractor, a good grade of asphalt as well as an optimal asphalt laying technique.


The longevity of residential asphalt paving chiefly is dependent on the standard of the laying. Really, the major causes of deformation or ripping of an asphalt coating are the lack of compaction and a lean base. However, the maintenance of the asphalt pavement is also a determining factor in its own longevity. That's to say, you will need to seal your driveway once in ten years, at a minimum, so as to maintain its great condition.


We suggest that you inform your asphalting contractor if you decide to have your driveway asphalt so as to sell your property. It might not be essential to pay top dollar for placing asphalt , in such a case.

Asphalt placing: cost and contract

The option of the asphalt laying contractor is essential. In order not to have unpleasant surprises, then you'll need to select it carefully.

Our guarantees and Asphalt work

Make sure the paving contractor has liability insurance coverage. A trip to the web site of the Office for Consumer Protection (OPC) will allow you to confirm whether an entrepreneur has ever become the subject of complaints.

These details must be included in the contract:

- date of start and end of the job;

- proof of insurance;

- technical particulars;

- RBQ accreditation number.

You should know that a paving contractor cannot demand you to make a deposit before work has begun. However, you should agree to the payment provisions and make sure it's on the contract.

A solid base for Asphalt- Bullhead City

Prior to estimating the asphalt driveway to your new residence by a contractor, or acquiring some fundamental knowledge is vital to guarantee that the job is done. Know first that the lack of compaction and the insufficient depth of the base are the two main sources for the deformation or tearing of a layer of asphalt. If it is a new driveway, it must initially be excavated to make room for a layer of crushed stone of adequate depth. A geotextile membrane is going to be placed beneath the granular backfill if the soil turns out to be somewhat loamy (clayey). If you own a new home, it's ideal to wait 6 to 12 months before paving your driveway, to enable the dirt to settle naturally. In the case of a repair of this entry, an easy replacement of the asphalt layer can be considered if the contractor believes that the existing foundation is adequate. In both scenarios, base redone or base maintained, the duration of its guarantee must be the same.

Asphalt Bullhead City Arizona

The weather conditions in our lovely state can have a devastating effect in an asphalt drive, thus the importance of including a slope having a minimum slope of 2%. This will allow water to drain to the street and minimize the risk of heaving or cracking. This important detail has to be taken into consideration when excavating and maintained during backfilling.

If you've got a van or recreational vehicle, notify the builder prior to the onset of the work: he is going to have the ability to provide materials accordingly. Some asphalt combinations produce an asphalt which is more resistant to heavy duty vehicles.

The asphalt layer should have an initial thickness of 6.35 to 7.6 cm (2.5 to 3 ) in order to reach a thickness of at least 5 cm (2 ) after being compacted. For optimal stability, the foundation should extend over the surface to be paved by about thirty centimeters (a dozen inches) on each side. Also note that the installation of unwanted supports around the foundation is a good way to avoid potential cracks and that asphalting done in chilly weather is going to be of inferior quality. It's therefore better to wait for the bright days to go back before starting work.

A definite contract with your builder in Bullhead City

To avoid unpleasant surprises, then select your contractor diligently and be certain the title and address of the business are composed on the contract. The beginning and finish dates of the work, as well as evidence of this contractor's liability insurance and also the technical specifics of the job to be carried out, should also be included. No contractor should need a down payment before work begins. To avoid the inconvenience that might lead to unforeseen expenses, visit the AsphaltBullhead City site. You will thus have the resources in hand to successfully complete your asphalt paving project.

Asphalt Bullhead City - Greatest Arizona in Arizona!

For caliber asphalting work , call on Asphalt, Bullhead City specialist team. Confirm our Company department to figure out the regions served.

Tar And Chip Paving Bullhead City | Parking Lot Repair And Striping Bullhead City
Home >> arizona/bullhead city >> asphalt
Share this...