Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Tar And Chip Paving- Alternatives for the asphalt surface in Cottonwood, Arizona


Tar And Chip Paving installed in an unstable surface could quickly lead to difficulties. There are three main choices for the Simple setup:

  1. Paving Over Existing Driveway: If your current driveway is in good condition and not revealing severe cracks or crumbling, hot asphalt mix can be placed directly within your driveway. 1 aspect is elevation: make sure fences, garage flooring, and other constructions aren't jeopardized by the higher level of the new surface.
  2. Eliminate old driveway, counter into the ground: The existing driveway is totally eliminated (or you might not have a driveway yet) and 4 to 6 inches of warm paving stone is put directly on the ground.
  3. Remove the old driveway and fasten it into a solid surface. This is actually the preferred method. An aggregated stone floor partly replaces part of the hot asphalt mix. Generally 6 to 8 inches of aggregate goes under 3 inches of asphalt.

The longer asphalt you operate, the more leeway you might have. For example, in 40 F, the crews just have 16 minutes to work on 1 1/2 inch thick asphalt. In general, for thin asphalt programs (approximately 1.5 cm), you need to wait until temperatures are 21 ° C or higher. Between 50 and 60 F, then you ought to speak to your contractor. The hot mix remains practical during this period, however, the time is constrained.

How much does an Tar And Chip Paving price in Cottonwood?

Consider the weather vagaries of the climate when choosing the standard of asphalt. The substantial temperature variations that we experience cause considerable damage to asphalt work.

In addition, it'll be useful to tell the contractor should you have a recreational vehicle or even a van. He might need to adapt the asphalt mixture so as to be more immune to the burden of heavy vehicles.

The advantages of Tar And Chip Paving

  • Smooth end;
  • non invasive
  • easy to Keep
  • watertightness guaranteed
  • withstands the rigors of the Quebec climate very well (provided it's been installed );
  • prevents the growth of moss;

It'll cost you between $ 3 and $11 per square foot; the cost fluctuates based on the characteristic of the asphalt used and the paving contractor.

For a sustainable Tar And Chip Paving

The existence of an asphalt paver can be up to 20 years, when the very best conditions are satisfied. We're talking about a professional paving contractor, a great quality of asphalt as well as also an optimal asphalt laying technique.


The longevity of residential asphalt paving largely is dependent on the standard of the placing. Indeed, the major causes of deformation or ripping of an asphalt coating are the lack of compaction plus a thin foundation. On the other hand, the upkeep of the asphalt sidewalk is also a determining factor in its own longevity. That's to say, you will need to seal your drive once in ten decades, at a minimum, so as to maintain its good condition.


We suggest that you notify your asphalting contractor if you choose to have your driveway asphalt in order to offer your property. It might not be necessary to pay top dollar for placing asphalt , in this case.

Tar And Chip Paving placing: price and contract

The option of the asphalt laying builder is indispensable. In order not to have unpleasant surprises, then you will have to choose it carefully.

Guarantee that the paving contractor has liability insurance. A trip to the web site of the Office for Consumer Protection (OPC) will make it possible for you to verify whether an entrepreneur has ever become the subject of complaints.

The following details must be included in the contract:

- date of start and finish of the work;

- evidence of insurance;

- technical details;

- RBQ certification number.

You should be aware that a paving contractor can't require you to make a deposit before work has started. But you need to agree to the payment provisions and be sure it's on the contract.

A strong foundation for Tar And Chip Paving- Cottonwood

Prior to estimating the asphalt driveway to your new home by a builder, or acquiring some fundamental knowledge is vital to make sure the job is done. Know first that the absence of compaction and the insufficient thickness of the base are the two main causes of the deformation or ripping of a layer of asphalt. If it is a new driveway, then it has to first be excavated to make room for a layer of crushed stone of sufficient depth. A geotextile membrane will be placed beneath the granular backfill if the dirt proves to be very loamy (clayey). If you own a new house, it is best to wait for 6 to 12 months prior to paving your drive, to allow the soil to settle naturally. In the case of a repair of this entry, a simple replacement of the asphalt coating can be considered if the contractor believes that the present base is sufficient. In both cases, base redone or foundation maintained, the duration of its warranty has to be exactly the same.

Tar And Chip Paving Cottonwood Arizona

The weather conditions in our lovely state may have a devastating effect in an asphalt driveway, thus the importance of including a slope having a minimum slope of 2%. This will enable water to drain to the road and minimize the risk of heaving or cracking. This important detail has to be taken into consideration when excavating and maintained during backfilling.

In case you've got a van or recreational vehicle, notify the builder before the start of the work: he will have the ability to supply materials accordingly. Some asphalt combinations produce an asphalt which is more immune to heavy-duty vehicles.

The asphalt layer should have an initial thickness of 6.35 to 7.6 cm (2.5 to 3 in) so as to reach a thickness of 5 cm (2 ) after being compacted. For optimum stability, the foundation should extend over the surface to be paved by about thirty centimeters (a dozen inches) on each side. Also mention that the setup of side supports around the foundation is a fantastic way to prevent possible cracks and that asphalting done in cold weather is going to be of poor quality. It's therefore better to await the sunny days to go back before beginning work.

To avoid unpleasant surprises, select your contractor diligently and be certain the title and address of the company are written about the contract. The start and finish dates of the job, as well as proof of the contractor's liability insurance and the technical details of the project to be carried out, should also be included. No contractor should need a down payment before work begins. To avoid the inconvenience that could lead to unforeseen costs, take a look at the Tar And Chip PavingCottonwood site. You may thus have the resources in hand to successfully finish your asphalt paving project.

Tar And Chip Paving Cottonwood - Best Arizona in Arizona!

For caliber asphalting perform , call on Tar And Chip Paving, Cottonwood professional team. We've got more than twenty decades of expertise in asphalt laying, resurfacing, maintenance and repair. Consult our Business department to find out the regions served.

Snow Removal Cottonwood | Asphalt Cottonwood
Home >> arizona/cottonwood >> tar and chip paving
Share this...