Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Tar And Chip Paving- Options for the asphalt surface in Flagstaff, Arizona


Tar And Chip Paving installed in an unstable surface could quickly lead to problems. There are three main options for the basic installation:

  1. Paving Over Existing Driveway: If your current driveway is in good shape rather than revealing serious cracks or crumbling, hot asphalt mixture can be laid directly over your driveway. One aspect is height: make sure fences, garage flooring, and other constructions aren't jeopardized by the higher level of the surface.
  2. Eliminate old driveway, counter into the floor: The existing driveway is completely eliminated (or you might not have a driveway yet) and 4 to 6 inches of warm paving stone is placed directly on the ground.
  3. Remove the old driveway and secure it to a good surface. This is actually the preferred method. An aggregated stone flooring partly replaces part of the hot asphalt mix.

Our Services:

The best time to install Tar And Chip Paving in Flagstaff

The more asphalt you operate, the more leeway you have. For instance, in 40 F, the crews only have 16 minutes to work on 1 1/2 inch thick asphalt. As the asphalt depth increases by 3 inches, the workability time also increases: 46 minutes. Generally, for thin asphalt applications (about 1.5 cm), you should wait until temperatures are 21 ° C or even higher. Between 50 and 60 F, then you'll need to speak to your contractor. The hot mix remains practical during this period, but the time is limited.

How much can an Tar And Chip Paving cost in Flagstaff?

Consider the weather vagaries of our climate when choosing the standard of asphalt. The substantial temperature variations that we experience cause considerable damage to asphalt perform.

Furthermore, it will be good to distinguish the contractor should you own a recreational vehicle or a van. He will need to accommodate the asphalt mix in order to be more resistant to the weight of heavy vehicles.

The advantages of Tar And Chip Paving

  • Smooth end;
  • non-slip
  • easy to Keep
  • watertightness guaranteed
  • withstands the rigors of this Quebec climate quite well (provided it has been set up );
  • prevents the growth of moss;

It will cost you between $ 3 and $11 per square foot; the price varies depending on the quality of the asphalt employed along with the paving contractor.

For a sustainable Tar And Chip Paving

The life of an asphalt paver may be around 20 years, when the very best conditions are met. We're referring to a professional paving builder, a good grade of asphalt as well as an optimal asphalt laying technique.


The longevity of residential asphalt paving largely is dependent upon the quality of the laying. Indeed, the significant causes of deformation or ripping of an asphalt layer are the absence of compaction and a thin foundation. On the other hand, the upkeep of the asphalt pavement can be a deciding factor in its longevity. That is to say, you will need to seal your drive once in 10 years, at a minimum, in order to maintain its good condition.


We advise you to notify your asphalting builder if you choose to have your driveway asphalt so as to sell your property. It may not be essential to pay top dollar for laying asphalt , in this circumstance.

Tar And Chip Paving placing: price and contract

The option of the asphalt laying contractor is indispensable. In order to not have unpleasant surprises, then you will have to choose it carefully.

Our ensures and Tar And Chip Paving work

Make sure the paving contractor has liability insurance coverage. A visit to the website of the Office for Consumer Protection (OPC) will make it possible for you to confirm whether an entrepreneur has ever become the subject of complaints.

The following details must be included in the contract:

- date of beginning and end of the job;

- proof of insurance;

- technical details;

- RBQ certification number.

You ought to know that a paving contractor can't require you to make a down payment before work has started. However, you should agree to the payment terms and be sure it's about the contract.

Prior to estimating the asphalt drive to your new residence by a contractor, or acquiring some fundamental knowledge is vital to guarantee that the job is well done. Know first that the absence of compaction and the insufficient thickness of the foundation are the two chief sources for the deformation or ripping of a coating of asphalt. If it is a new driveway, it must first be excavated to make room for a coating of crushed stone of sufficient depth. A geotextile membrane is going to be set beneath the granular backfill if the soil proves to be somewhat loamy (clayey). If you own a new home, it is ideal to wait 6 to 12 months prior to paving your driveway, to enable the dirt to settle . In the event of a fix of this entrance, an easy replacement of the asphalt layer can be considered if the contractor considers that the present foundation is sufficient. In both scenarios, base redone or base maintained, the whole period of its warranty must be exactly the same.

Tar And Chip Paving Flagstaff Arizona

The weather conditions in our beautiful province can have a devastating effect on an asphalt drive, thus the importance of adding a slope having a minimum slope of 2%. This will enable water to drain to the road and decrease the danger of heaving or cracking. This important detail has to be taken into account when excavating and preserved during backfilling.

In case you have a van or recreational vehicle, notify the contractor before the start of the job: he will be able to supply materials accordingly. Some asphalt mixtures produce an asphalt that is more immune to heavy-duty vehicles.

The asphalt layer should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 in) so as to reach a thickness of 5 cm (2 ) after being compacted. For optimal stability, the base should extend across the surface to be paved by roughly thirty centimeters (a couple inches) on each side. Also note that the installation of unwanted supports around the foundation is a good way to prevent possible cracks and this asphalting done in cold weather will be of inferior quality. It's therefore better to wait for the sunny days to return before beginning work.

To avoid unpleasant surprises, select your contractor and make sure that the name and address of the business are written on the contract. The beginning and end dates of the job, in addition to evidence of the builder's liability insurance and also the technical specifics of the project to be completed, should also be included. No contractor should require a deposit before work begins. To prevent the inconvenience that might cause unforeseen costs, take a look at the Tar And Chip PavingFlagstaff website. You may thus have the resources in hand to successfully finish your asphalt paving project.

Tar And Chip Paving Flagstaff - Greatest Arizona in Arizona!

For caliber asphalting perform , call on Tar And Chip Paving, Flagstaff professional team. Confirm our Business department to find out the regions served.

Snow Removal Flagstaff | Asphalt Flagstaff
Home >> arizona/flagstaff >> tar and chip paving
Share this...