Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Tar And Chip Paving- Options for the asphalt surface in Flowing Wells, Arizona


Tar And Chip Paving installed in an unstable surface can quickly lead to difficulties. There are three main options for the basic setup:

  1. Paving Over Existing Driveway: If your current driveway is in good condition and not revealing serious cracks or crumbling, hot asphalt mixture can be placed directly within your driveway. One aspect is height: make certain fences, garage flooring, and other structures are not jeopardized by the greater degree of this new surface.
  2. Eliminate old driveway, counter into the ground: The present driveway is totally removed (or you may not have a driveway yet) and 4 to 6 inches of hot paving stone is put directly on the ground.
  3. Eliminate the old driveway and fasten it to a solid surface. This is the preferred method. An aggregated stone floor partly replaces part of the hot asphalt mixture.

Our Services:

The best time to install Tar And Chip Paving from Flowing Wells

The longer asphalt you operate, the more leeway you have. By way of instance, at 40 F, the crews just have 16 minutes to operate on 1 1/2 inch thick asphalt. As the asphalt depth increases by 3 inches, the workability time also increases: 46 minutes. Generally, for lean asphalt programs (approximately 1.5 cm), you should wait until temperatures are 21 ° C or higher. Between 50 and 60 F, then you'll need to consult with your contractor. The hot mix remains practical during this period, however, the time is limited.

How much does an Tar And Chip Paving price in Flowing Wells?

Consider the weather vagaries of our climate when choosing the quality of asphalt. The substantial temperature variations that we experience cause appreciable damage to asphalt work.

In addition, it'll be useful to tell the contractor should you have a recreational vehicle or even a van. He will have to adapt the asphalt mixture so as to be more immune to the burden of heavy vehicles.

The Benefits of Tar And Chip Paving

  • Smooth end;
  • non-slip
  • Simple to Keep
  • watertightness ensured
  • withstands the rigors of this Quebec climate very well (provided it has been installed );
  • prevents the growth of moss;

It'll cost you between $ 3 and $11 per square foot; the cost fluctuates based on the quality of the asphalt employed and the paving contractor.

For a sustainable Tar And Chip Paving

The existence of an asphalt paver may be around 20 decades, when the very best states are met. We are referring to a professional paving builder, a great grade of asphalt and also an optimal asphalt laying technique.


The longevity of residential asphalt paving chiefly depends upon the quality of the laying. Indeed, the significant causes of deformation or tearing of an asphalt coating are the lack of compaction and a thin foundation. However, the upkeep of the asphalt sidewalk is also a determining factor in its own longevity. That is to say, you'll need to seal your driveway once in ten years, at a minimum, so as to keep its good condition.


We advise you to inform your asphalting builder if you choose to have your driveway asphalt in order to offer your property. It might not be necessary to pay top dollar for laying asphalt , in this circumstance.

Tar And Chip Paving placing: price and contract

The choice of the asphalt laying builder is indispensable. In order not to have unpleasant surprises, you'll have to choose it carefully.

Our guarantees and Tar And Chip Paving work

Guarantee that the paving contractor has liability insurance. A trip to the website of the Office for Consumer Protection (OPC) will allow you to confirm whether an entrepreneur has ever become the subject of complaints.

The following details must be included in the arrangement:

- date of beginning and finish of the work;

- evidence of insurance;

- technical particulars;

- RBQ certification number.

You ought to be aware that a paving builder cannot require that you make a down payment before work has begun. However, you need to agree to the payment terms and make sure it is about the contract.

Prior to estimating the asphalt driveway to your new home by a builder, or obtaining some fundamental knowledge is vital to guarantee that the job is well done. Know first that the lack of compaction and the inadequate depth of the base are the two main sources for the deformation or ripping of a coating of asphalt. When it's a new driveway, it must first be excavated to make room for a coating of crushed stone of sufficient thickness. A geotextile membrane will be placed under the granular backfill if the soil proves to be very loamy (clayey). If you have a new home, it is ideal to wait for 6 to 12 months prior to paving your drive, to allow the soil to settle naturally. In the event of a fix of the entry, an easy replacement of the asphalt coating can be considered in the event the contractor considers that the existing foundation is sufficient. In both scenarios, base redone or base preserved, the whole period of its guarantee has to be exactly the same.

Tar And Chip Paving Flowing Wells Arizona

The weather conditions in our beautiful province can have a disastrous impact on an asphalt drive, hence the importance of including a slope with a minimum slope of 2%. This will allow water to drain into the road and minimize the risk of heaving or cracking. This significant detail has to be taken into account when excavating and maintained during backfilling.

If you have a van or recreational vehicle, notify the builder prior to the start of the job: he is going to be able to provide materials so. Some asphalt combinations produce an asphalt which is more immune to heavy duty vehicles.

The asphalt coating should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 ) in order to accomplish a thickness of 5 cm (2 in) after being compacted. For optimal stability, the base should extend across the surface to be paved by roughly thirty centimeters (a dozen inches) on each side. Also note that the installation of side supports around the base is a fantastic method to avoid possible cracks and that asphalting done in chilly weather will be of inferior quality. It's therefore far better to wait for the bright days to go back before starting work.

A Tar And Chip Paving contract with your contractor in Flowing Wells

To avoid unpleasant surprises, choose your contractor and be sure the name and address of the business are written about the contract. The beginning and finish dates of this job, in addition to evidence of the builder's liability insurance and also the technical details of this project to be carried out, should also be included. No contractor should require a down payment before work starts. To avoid the inconvenience that could cause unforeseen costs, take a look at the Tar And Chip PavingFlowing Wells website. You will thus have all the tools in hand to successfully complete your asphalt paving project.

Tar And Chip Paving Flowing Wells - Best Arizona in Arizona!

For quality asphalting work , phone on Tar And Chip Paving, Flowing Wells professional team. We have more than 20 decades of experience in asphalt laying, resurfacing, maintenance and repair. Consult our Business department to find out the regions served.

Snow Removal Flowing Wells | Asphalt Flowing Wells
Home >> arizona/flowing wells >> tar and chip paving
Share this...