Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Asphalt- Options for the asphalt Coating in Fort Mohave, Arizona


Asphalt installed in an unstable surface can quickly lead to problems. There are three main choices for the basic installation:

  1. Paving Over Existing Driveway: If your existing driveway is in good condition and not showing serious fractures or crumbling, hot asphalt mix can be placed directly within your driveway. One aspect is elevation: make sure fences, garage floors, and other constructions aren't jeopardized by the greater degree of the new surface.
  2. Remove old driveway, counter into the ground: The present driveway is completely removed (or you may not have a driveway yet) and 4 to 6 inches of warm paving stone is put right on the ground.
  3. Eliminate the old driveway and secure it into a solid surface. This is the preferred method. An aggregated stone flooring partially replaces part of the hot asphalt mix. Typically 6 to 8 inches of limestone goes under 3 inches of asphalt.

The more asphalt you operate, the more leeway you have. For example, in 40 F, the crews just have 16 minutes to operate on 1 1/2 inch thick asphalt. As the asphalt depth increases by 3 inches, the workability time also raises: 46 minutes. Generally, for thin asphalt applications (approximately 1.5 cm), you need to wait until temperatures are 21 ° C or higher. Between 50 and 60 F, then you ought to consult with your contractor. The hot mix remains functional in this period of time, but the time is constrained.

How much can an Asphalt price in Fort Mohave?

Take into account the weather vagaries of the climate when choosing the standard of asphalt. The substantial temperature variations that we experience cause appreciable damage to asphalt work.

In addition, it will be useful to tell the contractor should you own a recreational vehicle or a van. He will have to adapt the asphalt mix in order to be more resistant to the weight of heavy vehicles.

The Benefits of Asphalt

  • Smooth finish;
  • non invasive
  • Simple to maintain
  • watertightness guaranteed
  • withstands the rigors of the Quebec climate quite well (provided it's been installed );
  • prevents the growth of moss;

It'll cost you between $ 3 and $11 per square foot; the cost varies depending on the quality of the asphalt employed along with the paving contractor.

To get a sustainable Asphalt

The existence of an asphalt paver can be around 20 years, when the very best states are satisfied. We are talking about a professional paving builder, a great grade of asphalt as well as also an optimal asphalt laying technique.

Asphalt in Fort Mohave: cost, quality of work and lifespan


The durability of residential asphalt paving chiefly depends on the standard of the placing. Really, the major causes of deformation or ripping of an asphalt layer are the lack of compaction plus a lean base. However, the maintenance of the asphalt pavement is also a determining factor in its own longevity. That is to say, you'll have to seal your drive once in ten decades, at a minimum, so as to maintain its great condition.


We suggest that you notify your asphalting contractor if you decide to get your driveway asphalt so as to offer your property. It may not be essential to pay top dollar for laying asphalt , in such a circumstance.

Asphalt placing: cost and contract

The choice of the asphalt laying contractor is essential. In order to not have unpleasant surprises, you'll have to select it carefully.

Make sure the paving contractor has liability insurance. A visit to the web site of the Office for Consumer Protection (OPC) will allow you to confirm whether an entrepreneur has been the subject of complaints.

The following details must be included in the arrangement:

- date of start and end of the work;

- evidence of insurance;

- technical details;

- RBQ certification number.

You should know that a paving builder cannot demand that you make a down payment before work has begun. However, you need to agree to the payment provisions and make sure it's about the contract.

A strong base for Asphalt- Fort Mohave

Before redoing the asphalt drive to your new home by a builder, or obtaining some basic knowledge is imperative to make sure the job is done. Know first that the lack of compaction and the insufficient depth of the foundation are the two chief causes of the deformation or ripping of a coating of asphalt. When it's a new driveway, it must first be excavated to make room for a coating of crushed stone of sufficient depth. A geotextile membrane will be set beneath the granular backfill if the dirt turns out to be somewhat loamy (clayey). If you have a new house, it's ideal to wait 6 to 12 months prior to paving your drive, to allow the dirt to settle naturally. In the event of a repair of this entry, a simple replacement of the asphalt layer can be considered if the contractor believes that the existing base is adequate. In both cases, foundation redone or foundation preserved, the duration of its warranty must be exactly the same.

Asphalt Fort Mohave Arizona

The weather conditions in our lovely state may have a disastrous impact on an asphalt drive, hence the importance of including a slope with a minimum slope of 2%. This will enable water to drain into the street and minimize the risk of heaving or cracking. This significant detail has to be taken into consideration when excavating and maintained during backfilling.

If you've got a van or recreational vehicle, notify the contractor before the onset of the job: he is going to have the ability to supply materials so. Some asphalt mixtures produce an asphalt that is more resistant to heavy-duty vehicles.

The asphalt coating should have an initial thickness of 6.35 to 7.6 cm (2.5 to 3 in) so as to accomplish a thickness of at least 5 cm (2 in) after being compacted. For optimal stability, the foundation should extend across the surface to be paved by roughly thirty centimeters (a dozen inches) on each side. Also mention that the installation of side supports around the foundation is a good method to avoid potential cracks and that asphalting done in cold weather will be of poor quality. It is therefore far better to wait for the sunny days to go back before beginning work.

A definite contract with your contractor in Fort Mohave

To avoid unpleasant surprises, then select your contractor and be certain that the title and address of his company are composed about the contract. The beginning and finish dates of this work, as well as proof of this builder's liability insurance and also the technical details of this project to be completed, should also be included. No contractor should need a down payment before work starts. To avoid the inconvenience that might cause unforeseen expenses, visit the AsphaltFort Mohave site. You will thus have the tools in hand to successfully finish your asphalt paving project.

Asphalt Fort Mohave - Greatest Arizona at Arizona!

For caliber asphalting work , call on Asphalt, Fort Mohave specialist team. Consult our Business section to figure out the regions served.

Tar And Chip Paving Fort Mohave | Parking Lot Repair And Striping Fort Mohave
Home >> arizona/fort mohave >> asphalt
Share this...