Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Tar And Chip Paving- Alternatives for the asphalt Coating in Fort Mohave, Arizona


Tar And Chip Paving installed on an unstable surface can quickly lead to difficulties. There are 3 main options for the Simple installation:

  1. Paving Over Existing Driveway: If your current driveway is in good shape rather than showing serious fractures or crumbling, hot asphalt mix can be laid directly over your driveway. One aspect is height: make certain fences, garage flooring, and other constructions aren't compromised by the higher degree of this new surface.
  2. Eliminate old driveway, peg to the ground: The existing driveway is totally removed (or you may not have a driveway nonetheless ) and 4 to 6 inches of hot paving stone is put directly on the ground.
  3. Eliminate the old driveway and fasten it to a solid surface. This is the preferred method. An aggregated stone floor partly replaces part of the hot asphalt mix. Generally 6 to 8 inches of aggregate extends under 3 inches of asphalt.

The more asphalt you operate, the more leeway you might have. By way of instance, in 40 F, the crews just have 16 minutes to work on 1 1/2 inch thick asphalt. As the asphalt thickness increases by 3 inches, the workability time also increases: 46 minutes. In general, for lean asphalt applications (about 1.5 cm), you should wait until temperatures are 21 ° C or higher. Between 50 and 60 F, you ought to speak to your contractor. The hot mix remains practical in this period of time, however, the time is limited.

How much does an Tar And Chip Paving cost in Fort Mohave?

Consider the weather vagaries of our climate when choosing the standard of asphalt. The significant temperature variations we experience cause considerable damage to asphalt perform.

Furthermore, it'll be useful to tell the contractor if you own a recreational vehicle or even a van. He might have to adapt the asphalt mixture in order to be more resistant to the burden of heavy vehicles.

The advantages of Tar And Chip Paving

A driveway paved with asphalt has several benefits:

It'll cost you between $ 3 and $11 per square foot; the price varies depending on the quality of the asphalt used and the paving contractor.

To get a sustainable Tar And Chip Paving

The existence of an asphalt paver may be around 20 decades, when the very best states are satisfied. We are referring to a professional paving builder, a good quality of asphalt as well as also an optimal asphalt laying technique.

Tar And Chip Paving in Fort Mohave: cost, quality of work and lifespan


The longevity of residential asphalt paving largely is dependent on the standard of the placing. Indeed, the significant causes of deformation or ripping of an asphalt layer are the absence of compaction and a thin foundation. On the other hand, the maintenance of the asphalt pavement can be a determining factor in its own longevity. That's to say, you'll need to seal your driveway once in ten years, at a minimum, in order to keep its good condition.


We suggest that you inform your asphalting contractor if you choose to get your driveway asphalt so as to sell your property. It might not be necessary to pay top dollar for laying asphalt , in such a case.

Tar And Chip Paving laying: cost and contract

The option of the asphalt laying contractor is indispensable. In order not to have unpleasant surprises, you'll need to select it carefully.

Our ensures and Tar And Chip Paving work

Guarantee that the paving contractor has liability insurance. A visit to the web site of the Office for Consumer Protection (OPC) will allow you to confirm whether an entrepreneur has ever been the subject of complaints.

The following details must be included in the arrangement:

- date of start and finish of the job;

- evidence of insurance;

- technical particulars;

- RBQ certification number.

You ought to be aware that a paving contractor cannot demand you to make a deposit before work has begun. However, you need to agree to the payment terms and make sure it is about the contract.

Prior to estimating the asphalt drive to your new residence by a builder, or obtaining some basic knowledge is imperative to guarantee that the job is well done. Know first that the absence of compaction and the inadequate thickness of the base are the two main sources for the deformation or ripping of a layer of asphalt. If it's a new driveway, then it must first be excavated to make room for a layer of crushed stone of sufficient depth. A geotextile membrane will be placed under the granular backfill if the soil proves to be very loamy (clayey). If you have a new house, it is best to wait for 6 to 12 months before paving your drive, to allow the dirt to settle . In the case of a fix of the entry, a simple replacement of the asphalt coating can be considered in the event the contractor considers that the present base is adequate. In both cases, foundation redone or base maintained, the duration of its guarantee must be exactly the same.

Tar And Chip Paving Fort Mohave Arizona

The weather conditions in our lovely state may have a devastating effect on an asphalt driveway, hence the significance of adding a slope with a minimum slope of 2%. This will enable water to drain into the street and decrease the danger of heaving or cracking. This important detail has to be taken into account when excavating and maintained during backfilling.

If you've got a van or recreational vehicle, notify the builder before the start of the work: he is going to be able to provide materials accordingly. Some asphalt mixtures produce an asphalt which is more resistant to heavy-duty vehicles.

The asphalt layer should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 ) in order to accomplish a thickness of 5 cm (2 in) after being compacted. For optimal stability, the base should extend across the surface to be paved by about thirty centimeters (a couple inches) on each side. Also note that the installation of side supports around the foundation is a good method to avoid possible cracks and this asphalting done in chilly weather will be of inferior quality. It is therefore far better to wait for the bright days to return before starting work.

A Tar And Chip Paving contract with your builder in Fort Mohave

To avoid unpleasant surprises, select your contractor and make certain the name and address of the business are composed on the contract. The beginning and finish dates of the work, as well as evidence of the contractor's liability insurance and the technical specifics of the project to be carried out, should also be included. No contractor should need a down payment before work starts. To prevent the inconvenience that could lead to unforeseen costs, visit the Tar And Chip PavingFort Mohave site. You will thus have the resources in hand to successfully complete your asphalt paving project.

Tar And Chip Paving Fort Mohave - Greatest Arizona at Arizona!

For quality asphalting perform , phone on Tar And Chip Paving, Fort Mohave specialist team. Confirm our Business department to find out the regions served.

Snow Removal Fort Mohave | Asphalt Fort Mohave
Home >> arizona/fort mohave >> tar and chip paving
Share this...