Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Asphalt- Alternatives for the asphalt Coating in Fountain Hills, Arizona


Asphalt installed on an unstable surface could quickly lead to problems. There are three main choices for the basic installation:

  1. Paving Over Existing Driveway: If your current driveway is in good shape and not revealing serious cracks or crumbling, hot asphalt mixture can be laid directly over your driveway. 1 facet is elevation: make sure fences, garage floors, and other structures are not compromised by the higher level of the new surface.
  2. Remove old driveway, counter into the floor: The existing driveway is totally eliminated (or you may not have a driveway nonetheless ) and 4 to 6 inches of hot paving stone is placed directly on the ground.
  3. Eliminate the old driveway and fasten it to a solid surface. This is actually the preferred method. An aggregated stone flooring partly replaces part of this hot asphalt mix. Typically 6 to 8 inches of limestone extends under 3 inches of asphalt.

Our Services:

The best time to install Asphalt from Fountain Hills

The more asphalt you operate, the more leeway you might have. For example, in 40 F, the crews just have 16 minutes to operate on 1 1/2 inch thick asphalt. Generally, for lean asphalt applications (about 1.5 cm), you need to wait until temperatures are 21 ° C or higher. Between 50 and 60 F, then you ought to consult with your contractor. The hot mix remains practical during this period, however, the time is constrained.

How much does an Asphalt price in Fountain Hills?

Take into account the weather vagaries of our climate when choosing the quality of asphalt. The substantial temperature variations that we experience cause considerable damage to asphalt work.

Furthermore, it will be useful to distinguish the contractor should you have a recreational vehicle or a van. He might need to accommodate the asphalt mix in order to be more resistant to the burden of heavy vehicles.

The Benefits of Asphalt

A driveway paved with asphalt has several advantages:

It will cost you between $ 3 and $11 per square foot; the price varies depending on the quality of the asphalt employed along with the paving contractor.

To get a sustainable Asphalt

The life of an asphalt paver can be around 20 years, when the best conditions are satisfied. We are referring to a professional paving contractor, a good quality of asphalt and an optimal asphalt laying technique.

Asphalt in Fountain Hills: cost, quality of work and lifespan


The durability of residential asphalt paving chiefly is dependent upon the quality of the laying. Indeed, the major causes of deformation or tearing of an asphalt coating are the absence of compaction plus a lean base. However, the maintenance of the asphalt pavement is also a determining factor in its longevity. That's to say, you'll need to seal your drive once in 10 decades, at a minimum, in order to maintain its great condition.


We suggest that you inform your asphalting contractor in case you decide to get your driveway asphalt so as to offer your property. It may not be necessary to pay top dollar for laying asphalt , in such a circumstance.

Asphalt placing: cost and contract

The choice of the asphalt laying contractor is indispensable. In order not to have unpleasant surprises, then you'll have to select it carefully.

Our ensures and Asphalt work

Make sure the paving contractor has liability insurance. A visit to the website of the Office for Consumer Protection (OPC) will allow you to verify whether an entrepreneur has ever become the subject of complaints.

The following details must be included in the arrangement:

- date of start and finish of the job;

- evidence of insurance;

- technical details;

- RBQ certification number.

You should be aware that a paving builder cannot demand you to make a down payment before work has begun. However, you should agree on the payment terms and make sure it is about the contract.

Before redoing the asphalt drive to your new residence by a builder, or obtaining some fundamental knowledge is vital to guarantee that the job is well done. Know first that the lack of compaction and the inadequate depth of the base are the two main sources for the deformation or tearing of a layer of asphalt. When it is a new driveway, then it must initially be excavated to make room for a coating of crushed stone of sufficient depth. A geotextile membrane is going to be placed beneath the granular backfill if the dirt proves to be very loamy (clayey). If you own a new house, it's ideal to wait 6 to 12 months prior to paving your driveway, to enable the soil to settle . In the case of a repair of the entry, an easy replacement of the asphalt coating can be considered in the event the contractor believes that the existing base is adequate. In both cases, foundation redone or base maintained, the duration of its guarantee has to be the same.

Asphalt Fountain Hills Arizona

The weather conditions in our beautiful province may have a disastrous impact in an asphalt drive, thus the significance of including a slope with a minimum slope of 2%. This will enable water to drain into the road and minimize the danger of heaving or cracking. This significant detail has to be taken into account when excavating and preserved during backfilling.

In case you've got a van or recreational vehicle, notify the builder prior to the start of the job: he will have the ability to provide materials so. Some asphalt mixtures produce an asphalt that is more resistant to heavy duty vehicles.

The asphalt layer should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 ) in order to accomplish a thickness of 5 cm (2 in) after being compacted. For optimal stability, the base should extend over the surface to be paved by about thirty centimeters (a couple inches) on each side. Also note that the setup of unwanted supports around the foundation is a good method to prevent potential cracks and this asphalting done in cold weather will be of poor quality. It's therefore far better to wait for the bright days to go back before beginning work.

A Asphalt contract with your contractor in Fountain Hills

To avoid unpleasant surprises, select your contractor and be certain the name and address of his business are composed on the contract. The beginning and finish dates of this work, as well as proof of the builder's liability insurance and the technical details of this job to be completed, should also be included. No contractor should need a deposit before work starts. To prevent the inconvenience that might cause unforeseen costs, take a look at the AsphaltFountain Hills site. You may thus have all the resources in hand to successfully complete your asphalt paving project.

Asphalt Fountain Hills - Greatest Arizona at Arizona!

For quality asphalting perform , call on Asphalt, Fountain Hills specialist team. Consult our Company section to find out the regions served.

Tar And Chip Paving Fountain Hills | Parking Lot Repair And Striping Fountain Hills
Home >> arizona/fountain hills >> asphalt
Share this...