Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Tar And Chip Paving- Alternatives for the asphalt surface in Fountain Hills, Arizona


Tar And Chip Paving installed in an unstable surface could quickly lead to difficulties. There are three Chief options for the Simple installation:

  1. Paving Over Existing Driveway: If your current driveway is in good condition and not revealing severe cracks or crumbling, hot asphalt mixture can be laid directly over your driveway. One aspect is elevation: make sure fences, garage flooring, and other constructions aren't compromised by the greater degree of this surface.
  2. Eliminate old driveway, peg to the ground: The present driveway is completely removed (or you might not have a driveway yet) and 4 to 6 inches of warm paving stone is put directly on the ground.
  3. Eliminate the old driveway and secure it to a good surface. This is the preferred method. An aggregated stone flooring partly replaces part of this hot asphalt mixture.

The longer asphalt you work, the more leeway you might have. For instance, in 40 F, the crews just have 16 minutes to operate on 1 1/2 inch thick asphalt. As the asphalt depth increases by 3 inches, the workability time also increases: 46 minutes. Generally, for thin asphalt applications (about 1.5 cm), you should wait until temperatures are 21 ° C or even higher. Between 50 and 60 F, you'll need to speak to your contractor. The hot mix remains practical in this period, but the time is limited.

How much can an Tar And Chip Paving cost in Fountain Hills?

Consider the weather vagaries of our climate when choosing the standard of asphalt. The significant temperature variations we experience cause considerable damage to asphalt perform.

Furthermore, it'll be useful to tell the contractor should you own a recreational vehicle or a van. He will need to adapt the asphalt mix in order to be more immune to the burden of heavy vehicles.

The advantages of Tar And Chip Paving

A driveway paved with asphalt has several advantages:

It will cost you between $ 3 and $11 per square foot; the price fluctuates based on the quality of the asphalt employed along with the paving contractor.

For a sustainable Tar And Chip Paving

The existence of an asphalt paver may be around 20 decades, when the very best conditions are met. We're referring to a professional paving contractor, a good grade of asphalt as well as also an optimal asphalt laying technique.


The longevity of residential asphalt paving largely is dependent on the standard of the laying. Really, the major causes of deformation or ripping of an asphalt coating are the absence of compaction plus a lean base. On the other hand, the upkeep of the asphalt pavement can be a determining factor in its own longevity. That's to say, you will have to seal your drive once in 10 decades, at a minimum, so as to keep its great state.


We advise you to inform your asphalting builder in case you choose to get your driveway asphalt so as to offer your property. It might not be necessary to pay top dollar for placing asphalt , in such a case.

Tar And Chip Paving placing: price and contract

The option of the asphalt laying builder is indispensable. In order to not have unpleasant surprises, then you will need to select it carefully.

Our ensures and Tar And Chip Paving work

Guarantee that the paving contractor has liability insurance coverage. A trip to the website of the Office for Consumer Protection (OPC) will make it possible for you to verify whether an entrepreneur has been the subject of complaints.

The following details must be included in the arrangement:

- date of beginning and end of the job;

- evidence of insurance;

- technical details;

- RBQ accreditation number.

You ought to be aware that a paving contractor can't require you to make a down payment before work has begun. But you need to agree on the payment provisions and make sure it's on the contract.

A strong foundation for Tar And Chip Paving- Fountain Hills

Before redoing the asphalt drive to your new residence by a contractor, or obtaining some fundamental knowledge is vital to guarantee that the job is done. Know first that the lack of compaction and the inadequate thickness of the base are the two chief sources for the deformation or ripping of a layer of asphalt. If it's a new driveway, then it has to initially be excavated to make room for a layer of crushed stone of adequate depth. A geotextile membrane is going to be placed beneath the granular backfill if the dirt proves to be very loamy (clayey). If you have a new home, it's best to wait 6 to 12 months prior to paving your drive, to allow the soil to settle . In the case of a repair of the entrance, a simple replacement of the asphalt layer can be considered if the contractor believes that the existing foundation is adequate. In both cases, foundation redone or foundation maintained, the duration of its warranty must be exactly the same.

Tar And Chip Paving Fountain Hills Arizona

The weather conditions in our lovely state can have a devastating effect in an asphalt drive, hence the significance of including a slope having a minimum slope of 2%. This will allow water to drain to the road and minimize the danger of heaving or cracking. This significant detail has to be taken into account when excavating and maintained during backfilling.

If you've got a van or recreational vehicle, notify the builder before the onset of the work: he will be able to provide materials so. Some asphalt mixtures produce an asphalt that is more immune to heavy duty vehicles.

The asphalt coating should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 ) so as to accomplish a thickness of 5 cm (2 in) after being compacted. For optimal stability, the foundation should extend over the surface to be paved by about thirty centimeters (a dozen inches) on each side. Also mention that the setup of unwanted supports around the base is a good method to avoid possible cracks and this asphalting done in cold weather is going to be of poor quality. It's therefore better to await the sunny days to go back before beginning work.

To avoid unpleasant surprises, then select your contractor and be certain the name and address of the company are written on the contract. The beginning and end dates of this work, as well as proof of the contractor's liability insurance and also the technical details of this job to be completed, should also be included. No contractor should require a deposit before work starts. To avoid the inconvenience that could lead to unforeseen costs, take a look at the Tar And Chip PavingFountain Hills website. You will thus have the resources in hand to successfully complete your asphalt paving project.

Tar And Chip Paving Fountain Hills - Greatest Arizona at Arizona!

For quality asphalting perform , phone on Tar And Chip Paving, Fountain Hills specialist team. Consult our Company section to figure out the regions served.

Snow Removal Fountain Hills | Asphalt Fountain Hills
Home >> arizona/fountain hills >> tar and chip paving
Share this...