Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Tar And Chip Paving- Alternatives for the asphalt surface in Goodyear, Arizona


Tar And Chip Paving installed in an unstable surface could quickly lead to problems. There are three main choices for the basic setup:

  1. Paving Over Existing Driveway: If your current driveway is in good shape rather than revealing serious cracks or crumbling, hot asphalt mixture can be laid directly over your driveway. 1 facet is elevation: make sure fences, garage flooring, and other constructions aren't jeopardized by the greater level of the surface.
  2. Eliminate old driveway, counter into the ground: The existing driveway is completely removed (or you may not have a driveway nonetheless ) and 4 to 6 inches of hot paving stone is placed right on the ground.
  3. Remove the old driveway and secure it to a good surface. This is the preferred method. An aggregated stone floor partially replaces part of this hot asphalt mixture.

The more asphalt you work, the more leeway you might have. For instance, in 40 F, the crews only have 16 minutes to operate on 1 1/2 inch thick asphalt. In general, for thin asphalt applications (about 1.5 cm), you should wait until temperatures are 21 ° C or even higher. Between 50 and 60 F, then you'll need to consult with your contractor. The hot mix is ​​still functional during this period of time, however, the time is constrained.

How much can an Tar And Chip Paving price in Goodyear?

Take into account the weather vagaries of the climate when choosing the standard of asphalt. The significant temperature variations we experience cause appreciable damage to asphalt work.

In addition, it'll be useful to tell the contractor if you have a recreational vehicle or a van. He might have to adapt the asphalt mixture so as to be more immune to the weight of heavy vehicles.

The advantages of Tar And Chip Paving

  • Smooth end;
  • non-slip
  • easy to Keep
  • watertightness guaranteed
  • withstands the rigors of this Quebec climate quite well (provided it's been installed optimally);
  • prevents the growth of moss;

It'll cost you between $ 3 and $11 per square foot; the cost varies depending on the quality of the asphalt used and the paving contractor.

For a sustainable Tar And Chip Paving

The life of an asphalt paver may be around 20 decades, when the best states are satisfied. We're referring to a professional paving builder, a good quality of asphalt as well as an optimal asphalt laying technique.


The longevity of residential asphalt paving chiefly depends on the standard of the placing. Indeed, the significant causes of deformation or tearing of an asphalt layer are the lack of compaction plus a thin foundation. However, the upkeep of the asphalt sidewalk is also a determining factor in its own longevity. That's to say, you will have to seal your drive once in 10 years, at a minimum, so as to maintain its great state.


We suggest that you notify your asphalting builder in case you decide to get your driveway asphalt in order to sell your property. It may not be essential to pay top dollar for laying asphalt , in this case.

Tar And Chip Paving laying: price and contract

The choice of the asphalt laying builder is essential. In order to not have unpleasant surprises, you will have to choose it carefully.

Make sure the paving contractor has liability insurance coverage. A visit to the web site of the Office for Consumer Protection (OPC) will allow you to verify whether an entrepreneur has become the subject of complaints.

The following details should be included in the contract:

- date of beginning and end of the job;

- proof of insurance;

- technical details;

- RBQ accreditation number.

You should know that a paving contractor cannot require you to make a down payment before work has begun. But you need to agree on the payment provisions and make sure it's about the contract.

Prior to estimating the asphalt driveway to your new home by a contractor, or acquiring some basic knowledge is imperative to make sure the job is done. Know first that the absence of compaction and the inadequate thickness of the foundation are the two chief sources for the deformation or tearing of a layer of asphalt. If it's a new driveway, then it must initially be excavated to make room for a layer of crushed stone of sufficient depth. A geotextile membrane is going to be set under the granular backfill if the soil turns out to be very loamy (clayey). If you own a new house, it's ideal to wait for 6 to 12 months before paving your driveway, to allow the soil to settle naturally. In the case of a repair of the entrance, a simple replacement of the asphalt layer can be considered if the contractor considers that the present foundation is sufficient. In both cases, foundation redone or foundation preserved, the duration of its warranty has to be the same.

Tar And Chip Paving Goodyear Arizona

The weather conditions in our beautiful province can have a devastating effect in an asphalt drive, thus the importance of including a slope with a minimum slope of 2%. This will enable water to drain into the road and decrease the danger of heaving or cracking. This important detail must be taken into consideration when excavating and preserved during backfilling.

If you've got a van or recreational vehicle, notify the contractor prior to the onset of the job: he is going to be able to supply materials so. Some asphalt combinations produce an asphalt which is more resistant to heavy-duty vehicles.

The asphalt layer should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 in) in order to accomplish a thickness of 5 cm (2 in) after being compacted. For optimum stability, the base should extend across the surface to be paved by about thirty centimeters (a dozen inches) on each side. Also mention that the setup of side supports around the base is a good way to avoid possible cracks and this asphalting done in chilly weather is going to be of poor quality. It is therefore better to await the sunny days to go back before starting work.

To avoid unpleasant surprises, then choose your contractor and be certain that the name and address of his company are composed on the contract. The beginning and end dates of the job, in addition to evidence of this builder's liability insurance and the technical specifics of the job to be carried out, should also be included. No contractor should need a down payment before work starts. To prevent the inconvenience that might lead to unforeseen expenses, visit the Tar And Chip PavingGoodyear website. You may thus have all the tools in hand to successfully finish your asphalt paving project.

Tar And Chip Paving Goodyear - Greatest Arizona at Arizona!

For quality asphalting perform , call on Tar And Chip Paving, Goodyear professional team. We've got more than twenty years of experience in asphalt laying, resurfacing, maintenance and repair. Confirm our Business department to find out the regions served.

Snow Removal Goodyear | Asphalt Goodyear
Home >> arizona/goodyear >> tar and chip paving
Share this...