Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Asphalt- Options for the asphalt Coating in Kingman, Arizona


Asphalt installed on an unstable surface can quickly lead to problems. There are 3 main choices for the Simple installation:

  1. Paving Over Existing Driveway: If your existing driveway is in good shape and not showing severe fractures or crumbling, hot asphalt mix can be laid directly over your driveway. 1 facet is elevation: make certain fences, garage flooring, and other structures are not jeopardized by the higher level of the surface.
  2. Eliminate old driveway, counter into the floor: The present driveway is totally removed (or you might not have a driveway yet) and 4 to 6 inches of hot paving stone is put directly on the ground.
  3. Remove the old driveway and secure it to a solid surface. This is the preferred method. An aggregated stone flooring partially replaces part of the hot asphalt mix.

The longer asphalt you operate, the more leeway you have. For example, in 40 F, the crews just have 16 minutes to operate on 1 1/2 inch thick asphalt. As the asphalt depth increases by 3 inches, the workability time also increases: 46 minutes. In general, for lean asphalt programs (approximately 1.5 cm), you should wait until temperatures are 21 ° C or even higher. Between 50 and 60 F, you ought to speak to your contractor. The hot mix remains functional in this period of time, however, the time is constrained.

How much can an Asphalt price in Kingman?

Take into account the weather vagaries of the climate when deciding upon the quality of asphalt. The significant temperature variations we experience cause appreciable damage to asphalt perform.

In addition, it will be good to distinguish the contractor should you have a recreational vehicle or a van. He might have to accommodate the asphalt mix in order to be more immune to the burden of heavy vehicles.

The Benefits of Asphalt

  • Smooth finish;
  • non invasive
  • Simple to maintain
  • watertightness ensured
  • withstands the rigors of this Quebec climate very well (provided it's been installed );
  • prevents the growth of moss;

It will cost you between $ 3 and $11 per square foot; the cost varies depending on the quality of the asphalt employed along with the paving contractor.

To get a sustainable Asphalt

The existence of an asphalt paver may be around 20 years, when the very best states are met. We are talking about a professional paving contractor, a great quality of asphalt as well as an optimal asphalt laying technique.


The durability of residential asphalt paving chiefly is dependent on the quality of the placing. Indeed, the major causes of deformation or ripping of an asphalt layer are the lack of compaction plus a lean base. However, the maintenance of the asphalt pavement is also a deciding factor in its own longevity. That's to say, you will need to seal your drive once in 10 years, at a minimum, in order to keep its good condition.


We suggest that you notify your asphalting builder if you choose to get your driveway asphalt in order to sell your property. It might not be essential to pay top dollar for placing asphalt , in this case.

Asphalt placing: cost and contract

The option of the asphalt laying builder is indispensable. In order to not have unpleasant surprises, then you'll need to select it carefully.

Guarantee that the paving contractor has liability insurance. A trip to the website of the Office for Consumer Protection (OPC) will allow you to verify whether an entrepreneur has ever become the subject of complaints.

These details should be included in the arrangement:

- date of beginning and end of the work;

- evidence of insurance;

- technical particulars;

- RBQ accreditation number.

You should know that a paving contractor can't demand that you make a down payment before work has started. But you should agree to the payment terms and make sure it's about the contract.

A strong base for Asphalt- Kingman

Before redoing the asphalt driveway to your new home by a contractor, or acquiring some fundamental knowledge is imperative to make sure the job is well done. Know first that the absence of compaction and the insufficient depth of the foundation are the two chief sources for the deformation or ripping of a layer of asphalt. If it is a new driveway, then it has to initially be excavated to make room for a layer of crushed stone of sufficient thickness. A geotextile membrane will be set under the granular backfill if the dirt turns out to be somewhat loamy (clayey). If you own a new home, it's ideal to wait for 6 to 12 months prior to paving your drive, to enable the soil to settle naturally. In the event of a fix of the entrance, an easy replacement of the asphalt layer can be considered in the event the contractor believes that the present foundation is adequate. In both cases, base redone or base preserved, the duration of its guarantee must be the same.

Asphalt Kingman Arizona

The weather conditions in our lovely state may have a devastating effect on an asphalt driveway, hence the significance of including a slope with a minimum slope of 2%. This will allow water to drain to the street and decrease the risk of heaving or cracking. This significant detail must be taken into account when excavating and maintained during backfilling.

If you've got a van or recreational vehicle, notify the contractor prior to the onset of the job: he will have the ability to supply materials so. Some asphalt mixtures produce an asphalt that is more resistant to heavy duty vehicles.

The asphalt coating should have an initial thickness of 6.35 to 7.6 cm (2.5 to 3 in) so as to accomplish a thickness of 5 cm (2 in) after being compacted. For optimal stability, the foundation should extend over the surface to be paved by roughly thirty centimeters (a couple inches) on each side. Also mention that the installation of side supports around the foundation is a good way to prevent potential cracks and this asphalting done in chilly weather will be of inferior quality. It's therefore better to await the sunny days to go back before beginning work.

To avoid unpleasant surprises, select your contractor diligently and be certain the title and address of the business are written on the contract. The start and finish dates of this work, as well as evidence of the builder's liability insurance and also the technical specifics of the project to be carried out, should also be included. No contractor should need a deposit before work starts. To prevent the inconvenience that might cause unforeseen costs, take a look at the AsphaltKingman website. You will thus have the resources in hand to successfully complete your asphalt paving project.

Asphalt Kingman - Best Arizona at Arizona!

For caliber asphalting work , phone on Asphalt, Kingman professional team. We've got over twenty decades of expertise in asphalt laying, resurfacing, maintenance and repair. Confirm our Business department to figure out the regions served.

Tar And Chip Paving Kingman | Parking Lot Repair And Striping Kingman
Home >> arizona/kingman >> asphalt
Share this...