Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Tar And Chip Paving- Options for the asphalt surface in Kingman, Arizona


Tar And Chip Paving installed in an unstable surface could quickly lead to difficulties. There are 3 Chief choices for the Simple setup:

  1. Paving Over Existing Driveway: If your existing driveway is in good shape rather than revealing serious fractures or crumbling, hot asphalt mixture can be placed directly within your driveway. 1 facet is height: make sure fences, garage flooring, and other structures are not jeopardized by the higher level of this new surface.
  2. Remove old driveway, peg to the floor: The present driveway is completely eliminated (or you might not have a driveway nonetheless ) and 4 to 6 inches of warm paving stone is put right on the ground.
  3. Eliminate the old driveway and secure it to a solid surface. This is actually the preferred method. An aggregated stone floor partly replaces part of this hot asphalt mixture. Typically 6 to 8 inches of aggregate goes under 3 inches of asphalt.

The longer asphalt you operate, the more leeway you might have. By way of example, at 40 F, the crews only have 16 minutes to operate on 1 1/2 inch thick asphalt. As the asphalt depth increases by 3 inches, the workability time also increases: 46 minutes. In general, for thin asphalt programs (about 1.5 cm), you should wait until temperatures are 21 ° C or higher. Between 50 and 60 F, then you'll need to speak to your contractor. The hot mix is ​​still functional during this period of time, however, the time is constrained.

How much does an Tar And Chip Paving price in Kingman?

Consider the weather vagaries of our climate when choosing the quality of asphalt. The substantial temperature variations that we experience cause appreciable damage to asphalt work.

Furthermore, it'll be good to distinguish the contractor if you own a recreational vehicle or a van. He might need to adapt the asphalt mix so as to be more resistant to the burden of heavy vehicles.

The Benefits of Tar And Chip Paving

  • Smooth end;
  • non-slip
  • easy to maintain
  • watertightness guaranteed
  • withstands the rigors of the Quebec climate quite well (provided it's been set up );
  • prevents the growth of moss;

It will cost you between $ 3 and $11 per square foot; the price varies depending on the characteristic of the asphalt used and the paving contractor.

For a sustainable Tar And Chip Paving

The life of an asphalt paver can be around 20 years, when the best states are satisfied. We're referring to a professional paving builder, a great grade of asphalt and also an optimal asphalt laying technique.


The longevity of residential asphalt paving chiefly is dependent upon the standard of the placing. Indeed, the significant causes of deformation or ripping of an asphalt coating are the absence of compaction plus a lean base. On the other hand, the maintenance of the asphalt pavement is also a determining factor in its longevity. That is to say, you will need to seal your driveway once in ten decades, at a minimum, so as to keep its great condition.


We advise you to inform your asphalting contractor in case you choose to have your driveway asphalt so as to sell your property. It may not be necessary to pay top dollar for laying asphalt , in such a case.

Tar And Chip Paving placing: price and contract

The option of the asphalt laying builder is essential. In order to not have unpleasant surprises, you'll need to select it carefully.

Guarantee that the paving contractor has liability insurance coverage. A trip to the web site of the Office for Consumer Protection (OPC) will make it possible for you to verify whether an entrepreneur has ever been the subject of complaints.

These details must be included in the contract:

- date of beginning and end of the work;

- evidence of insurance;

- technical particulars;

- RBQ accreditation number.

You ought to know that a paving builder cannot demand that you make a down payment before work has started. But you need to agree to the payment terms and be sure it's about the contract.

A strong base for Tar And Chip Paving- Kingman

Before redoing the asphalt driveway to your new home by a builder, or acquiring some fundamental knowledge is vital to guarantee that the job is done. Know first that the lack of compaction and the insufficient thickness of the base are the two main causes of the deformation or tearing of a layer of asphalt. When it is a new driveway, then it must first be excavated to make room for a layer of crushed stone of adequate depth. A geotextile membrane is going to be placed beneath the granular backfill if the soil proves to be somewhat loamy (clayey). If you have a new home, it's ideal to wait 6 to 12 months before paving your driveway, to allow the dirt to settle . In the case of a fix of the entry, an easy replacement of the asphalt layer can be considered if the contractor believes that the present foundation is adequate. In both scenarios, foundation redone or foundation preserved, the whole period of its warranty must be exactly the same.

Tar And Chip Paving Kingman Arizona

The weather conditions in our lovely state may have a devastating effect on an asphalt driveway, thus the importance of adding a slope having a minimum slope of 2%. This will enable water to drain to the road and decrease the danger of heaving or cracking. This important detail has to be taken into consideration when excavating and maintained during backfilling.

In case you have a van or recreational vehicle, notify the builder prior to the onset of the work: he is going to have the ability to supply materials so. Some asphalt combinations produce an asphalt which is more immune to heavy-duty vehicles.

The asphalt layer should have an initial thickness of 6.35 to 7.6 cm (2.5 to 3 in) so as to reach a thickness of 5 cm (2 ) after being compacted. For optimum stability, the base should extend over the surface to be paved by about thirty centimeters (a dozen inches) on each side. Also note that the setup of side supports around the foundation is a fantastic method to avoid potential cracks and that asphalting done in chilly weather will be of inferior quality. It's therefore far better to await the bright days to return before beginning work.

A Tar And Chip Paving contract with your contractor in Kingman

To avoid unpleasant surprises, then choose your contractor and be sure the title and address of the company are composed on the contract. The start and end dates of the job, as well as proof of this builder's liability insurance and the technical details of the job to be carried out, should also be included. No contractor should require a down payment before work begins. To avoid the inconvenience that might lead to unforeseen costs, visit the Tar And Chip PavingKingman site. You will thus have the resources in hand to successfully finish your asphalt paving project.

Tar And Chip Paving Kingman - Best Arizona at Arizona!

For caliber asphalting perform , phone on Tar And Chip Paving, Kingman specialist team. We've got more than twenty decades of experience in asphalt laying, resurfacing, maintenance and repair. Consult our Business section to figure out the regions served.

Snow Removal Kingman | Asphalt Kingman
Home >> arizona/kingman >> tar and chip paving
Share this...