Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Asphalt- Options for the asphalt surface in Silver Spring, Maryland


Asphalt installed on an unstable surface can quickly lead to problems. There are 3 Chief choices for the basic installation:

  1. Paving Over Existing Driveway: If your current driveway is in good condition rather than revealing serious fractures or crumbling, hot asphalt mixture can be laid directly over your driveway. One aspect is height: make certain fences, garage floors, and other structures are not jeopardized by the higher level of the new surface.
  2. Remove old driveway, peg to the ground: The existing driveway is totally removed (or you may not have a driveway yet) and 4 to 6 inches of hot paving stone is put directly on the ground.
  3. Eliminate the old driveway and fasten it into a solid surface. This is actually the preferred method. An aggregated stone floor partially replaces part of this hot asphalt mix.

Our Services:

The best time to install Asphalt in Silver Spring

The longer asphalt you operate, the more leeway you might have. For instance, at 40 F, the crews just have 16 minutes to operate on 1 1/2 inch thick asphalt. As the asphalt thickness increases by 3 inches, the workability time also raises: 46 minutes. Generally, for lean asphalt applications (approximately 1.5 cm), you need to wait until temperatures are 21 ° C or even higher. Between 50 and 60 F, you'll need to speak to your contractor. The hot mix remains practical in this period, but the time is limited.

How much can an Asphalt price in Silver Spring?

Take into account the weather vagaries of the climate when choosing the standard of asphalt. The significant temperature variations we experience cause considerable damage to asphalt work.

In addition, it will be good to distinguish the contractor if you own a recreational vehicle or even a van. He might have to adapt the asphalt mix in order to be more immune to the weight of heavy vehicles.

The advantages of Asphalt

A driveway paved with asphalt has several benefits:

It will cost you between $ 3 and $11 per square foot; the cost varies depending on the characteristic of the asphalt employed and the paving contractor.

For a sustainable Asphalt

The existence of an asphalt paver may be up to 20 decades, when the best conditions are satisfied. We are referring to a professional paving contractor, a great quality of asphalt and an optimal asphalt laying technique.


The longevity of residential asphalt paving largely is dependent on the quality of the placing. Really, the significant causes of deformation or tearing of an asphalt layer are the lack of compaction and a thin foundation. On the other hand, the maintenance of the asphalt pavement can be a deciding factor in its own longevity. That's to say, you'll need to seal your driveway once in ten years, at a minimum, so as to keep its good condition.


We advise you to notify your asphalting builder if you decide to have your driveway asphalt so as to offer your property. It may not be necessary to pay top dollar for placing asphalt , in such a case.

Asphalt placing: price and contract

The option of the asphalt laying builder is essential. In order not to have unpleasant surprises, you'll have to select it carefully.

Make sure the paving contractor has liability insurance coverage. A visit to the website of the Office for Consumer Protection (OPC) will make it possible for you to confirm whether an entrepreneur has become the subject of complaints.

These details must be included in the contract:

- date of beginning and end of the job;

- evidence of insurance;

- technical particulars;

- RBQ certification number.

You should be aware that a paving contractor can't require that you make a down payment before work has begun. However, you need to agree on the payment provisions and be sure it's about the contract.

A strong foundation for Asphalt- Silver Spring

Before redoing the asphalt driveway to your new home by a builder, or acquiring some basic knowledge is imperative to make sure the job is done. Know first that the lack of compaction and the insufficient depth of the foundation are the two main sources for the deformation or tearing of a coating of asphalt. When it's a new driveway, it must first be excavated to make room for a layer of crushed stone of adequate depth. A geotextile membrane will be placed under the granular backfill if the soil proves to be somewhat loamy (clayey). If you have a new house, it is ideal to wait 6 to 12 months before paving your driveway, to enable the soil to settle . In the event of a repair of the entry, a simple replacement of the asphalt layer can be considered in the event the contractor believes that the existing foundation is sufficient. In both scenarios, base redone or foundation preserved, the whole period of its warranty must be exactly the same.

Asphalt Silver Spring Maryland

The weather conditions in our lovely state can have a devastating effect on an asphalt driveway, hence the importance of adding a slope with a minimum slope of 2%. This will enable water to drain into the road and decrease the danger of heaving or cracking. This important detail must be taken into consideration when excavating and maintained during backfilling.

In case you've got a van or recreational vehicle, notify the builder prior to the onset of the work: he is going to be able to supply materials so. Some asphalt combinations produce an asphalt that is more resistant to heavy duty vehicles.

The asphalt coating should have an initial thickness of 6.35 to 7.6 cm (2.5 to 3 ) in order to reach a thickness of 5 cm (2 ) after being compacted. For optimal stability, the foundation should extend over the surface to be paved by roughly thirty centimeters (a couple inches) on each side. Also mention that the setup of unwanted supports around the foundation is a good method to avoid possible cracks and this asphalting done in cold weather will be of inferior quality. It is therefore better to await the sunny days to return before starting work.

A Asphalt contract with your contractor in Silver Spring

To avoid unpleasant surprises, then choose your contractor diligently and be sure that the name and address of his business are composed about the contract. The beginning and end dates of this work, as well as evidence of the contractor's liability insurance and also the technical details of the job to be carried out, should also be included. No contractor should require a down payment before work starts. To prevent the inconvenience that could lead to unforeseen expenses, take a look at the AsphaltSilver Spring site. You may thus have all the tools in hand to successfully finish your asphalt paving project.

Asphalt Silver Spring - Greatest Maryland at Maryland!

For quality asphalting work , call on Asphalt, Silver Spring professional team. We have over twenty years of expertise in asphalt laying, resurfacing, maintenance and repair. Consult our Company section to find out the regions served.

Tar And Chip Paving Silver Spring | Parking Lot Repair And Striping Silver Spring
Home >> maryland/silver spring >> asphalt
Share this...