Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Concrete Maintenance- Options for the asphalt surface in Silver Spring, Maryland


Concrete Maintenance installed in an unstable surface can quickly lead to difficulties. There are three main choices for the basic installation:

  1. Paving Over Existing Driveway: If your current driveway is in good shape and not revealing serious fractures or crumbling, hot asphalt mix can be placed directly within your driveway. 1 facet is height: make certain fences, garage flooring, and other structures aren't jeopardized by the greater level of the surface.
  2. Remove old driveway, peg to the ground: The present driveway is completely eliminated (or you may not have a driveway nonetheless ) and 4 to 6 inches of hot paving stone is put directly on the ground.
  3. Eliminate the old driveway and fasten it to a good surface. This is actually the preferred method. An aggregated stone floor partly replaces part of the hot asphalt mix. Generally 6 to 8 inches of aggregate goes under 3 inches of asphalt.

The longer asphalt you operate, the more leeway you might have. For instance, at 40 F, the crews only have 16 minutes to work on 1 1/2 inch thick asphalt. As the asphalt thickness increases by 3 inches, the workability time also raises: 46 minutes. In general, for thin asphalt programs (approximately 1.5 cm), you need to wait until temperatures are 21 ° C or even higher. Between 50 and 60 F, you ought to consult with your contractor. The hot mix is ​​still practical in this period of time, but the time is constrained.

How much does an Concrete Maintenance cost in Silver Spring?

Consider the weather vagaries of the climate when choosing the quality of asphalt. The significant temperature variations we experience cause considerable damage to asphalt work.

Furthermore, it will be useful to tell the contractor if you own a recreational vehicle or a van. He might have to adapt the asphalt mixture so as to be more resistant to the burden of heavy vehicles.

The advantages of Concrete Maintenance

  • Smooth finish;
  • non-slip
  • easy to Keep
  • watertightness ensured
  • withstands the rigors of the Quebec climate quite well (provided it's been set up optimally);
  • prevents the growth of moss;

It'll cost you between $ 3 and $11 per square foot; the cost varies depending on the quality of the asphalt used and the paving contractor.

To get a sustainable Concrete Maintenance

The life of an asphalt paver can be up to 20 decades, when the very best conditions are satisfied. We are talking about a professional paving contractor, a great grade of asphalt as well as also an optimal asphalt laying technique.


The longevity of residential asphalt paving chiefly is dependent on the standard of the laying. Really, the major causes of deformation or tearing of an asphalt layer are the absence of compaction plus a thin foundation. On the other hand, the maintenance of the asphalt sidewalk can be a determining factor in its longevity. That's to say, you will need to seal your drive once in ten decades, at a minimum, in order to keep its good state.


We suggest that you inform your asphalting builder in case you choose to have your driveway asphalt in order to offer your property. It may not be essential to pay top dollar for placing asphalt , in this case.

Concrete Maintenance placing: cost and contract

The option of the asphalt laying builder is essential. In order not to have unpleasant surprises, you'll have to choose it carefully.

Make sure the paving contractor has liability insurance. A trip to the website of the Office for Consumer Protection (OPC) will make it possible for you to verify whether an entrepreneur has ever become the subject of complaints.

These details must be included in the contract:

- date of start and end of the work;

- proof of insurance;

- technical details;

- RBQ certification number.

You should know that a Concrete Maintenance builder cannot require that you make a deposit before work has begun. However, you should agree to the payment terms and make sure it's about the contract.

Prior to estimating the Concrete Maintenance drive to your new home by a contractor, or acquiring some fundamental knowledge is imperative to make sure the job is done. Know first that the lack of compaction and the inadequate thickness of the base are the two main sources for the deformation or ripping of a coating of asphalt. If it's a new driveway, it must initially be excavated to make room for a coating of crushed stone of adequate depth. A geotextile membrane is going to be set beneath the granular backfill if the soil turns out to be somewhat loamy (clayey). If you have a new home, it's best to wait 6 to 12 months prior to paving your drive, to allow the dirt to settle naturally. In the event of a fix of the entry, a simple replacement of the Concrete Maintenance coating can be considered if the contractor believes that the present foundation is adequate. In both scenarios, foundation redone or base preserved, the whole period of its warranty has to be exactly the same.

Concrete Maintenance Silver Spring Maryland

The weather conditions in our lovely state can have a devastating effect on an asphalt driveway, hence the importance of including a slope with a minimum slope of 2%. This will allow water to drain into the street and decrease the risk of heaving or cracking. This significant detail has to be taken into consideration when excavating and preserved during backfilling.

If you've got a van or recreational vehicle, notify the builder prior to the start of the work: he is going to have the ability to supply materials accordingly. Some asphalt combinations produce an asphalt that is more immune to heavy-duty vehicles.

The asphalt layer should have an initial thickness of 6.35 to 7.6 cm (2.5 to 3 in) so as to accomplish a thickness of 5 cm (2 ) after being compacted. For optimal stability, the base should extend across the surface to be paved by about thirty centimeters (a couple inches) on each side. Also mention that the setup of unwanted supports around the base is a fantastic method to prevent potential cracks and that Concrete Maintenance done in cold weather is going to be of inferior quality. It's therefore better to wait for the bright days to return before beginning work.

A definite contract with your contractor in Silver Spring

To avoid unpleasant surprises, then choose your contractor and be certain the title and address of his company are composed about the contract. The beginning and finish dates of this work, in addition to evidence of the builder's liability insurance and also the technical details of the project to be carried out, should also be included. No contractor should need a deposit before work begins. To avoid the inconvenience that might lead to unforeseen costs, visit the Concrete MaintenanceSilver Spring site. You will thus have all the tools in hand to successfully complete your Concrete Maintenance project.

Concrete Maintenance Silver Spring - Best Maryland at Maryland!

For caliber asphalting work , phone on Concrete Maintenance, Silver Spring professional team. Confirm our Business department to find out the regions served.

Parking Lot Repair And Striping Silver Spring | Snow Removal Silver Spring
Home >> maryland/silver spring >> concrete maintenance
Share this...