Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Concrete Maintenance- Alternatives for the asphalt Coating in Walker Mill, Maryland


Concrete Maintenance installed in an unstable surface can quickly lead to difficulties. There are 3 Chief choices for the Simple installation:

  1. Paving Over Existing Driveway: If your existing driveway is in good shape rather than showing severe fractures or crumbling, hot asphalt mixture can be placed directly within your driveway. 1 aspect is height: make certain fences, garage floors, and other constructions aren't compromised by the higher level of the new surface.
  2. Remove old driveway, peg to the ground: The present driveway is completely eliminated (or you may not have a driveway yet) and 4 to 6 inches of warm paving stone is placed right on the ground.
  3. Remove the old driveway and secure it into a solid surface. This is actually the preferred method. An aggregated stone flooring partially replaces part of the hot asphalt mix.

The more asphalt you work, the more leeway you might have. By way of instance, in 40 F, the crews only have 16 minutes to work on 1 1/2 inch thick asphalt. In general, for lean asphalt applications (about 1.5 cm), you need to wait until temperatures are 21 ° C or even higher. Between 50 and 60 F, you'll need to speak to your contractor. The hot mix is ​​still practical in this period, but the time is constrained.

How much does an Concrete Maintenance price in Walker Mill?

Consider the weather vagaries of our climate when deciding upon the standard of asphalt. The substantial temperature variations that we experience cause appreciable damage to asphalt perform.

In addition, it will be useful to tell the contractor should you have a recreational vehicle or a van. He might have to adapt the asphalt mixture in order to be more immune to the weight of heavy vehicles.

The Benefits of Concrete Maintenance

  • Smooth end;
  • non invasive
  • easy to maintain
  • watertightness ensured
  • withstands the rigors of this Quebec climate very well (provided it's been installed );
  • prevents the growth of moss;

It will cost you between $ 3 and $11 per square foot; the cost varies depending on the quality of the asphalt employed and the paving contractor.

For a sustainable Concrete Maintenance

The life of an asphalt paver can be up to 20 decades, when the very best conditions are met. We are talking about a professional paving contractor, a great grade of asphalt as well as also an optimal asphalt laying technique.

Concrete Maintenance in Walker Mill: price, quality of work and lifespan


The longevity of residential asphalt paving largely depends on the quality of the placing. Indeed, the major causes of deformation or ripping of an asphalt coating are the lack of compaction and a thin foundation. On the other hand, the maintenance of the asphalt pavement is also a determining factor in its longevity. That is to say, you will have to seal your drive once in ten years, at a minimum, in order to maintain its great condition.


We suggest that you notify your asphalting builder in case you choose to have your driveway asphalt in order to sell your property. It may not be necessary to pay top dollar for laying asphalt , in this case.

Concrete Maintenance laying: cost and contract

The choice of the asphalt laying builder is essential. In order to not have unpleasant surprises, you will have to choose it carefully.

Our guarantees and Concrete Maintenance work

Make sure the paving contractor has liability insurance. A visit to the website of the Office for Consumer Protection (OPC) will allow you to confirm whether an entrepreneur has ever been the subject of complaints.

These details must be included in the contract:

- date of beginning and end of the work;

- evidence of insurance;

- technical particulars;

- RBQ accreditation number.

You ought to know that a Concrete Maintenance contractor can't require you to make a deposit before work has started. But you need to agree on the payment provisions and make sure it is on the contract.

A solid base for Concrete Maintenance- Walker Mill

Before redoing the Concrete Maintenance driveway to your new home by a contractor, or acquiring some basic knowledge is imperative to make sure the job is well done. Know first that the absence of compaction and the inadequate depth of the foundation are the two main sources for the deformation or tearing of a coating of asphalt. When it's a new driveway, then it must first be excavated to make room for a coating of crushed stone of adequate depth. A geotextile membrane is going to be set beneath the granular backfill if the dirt turns out to be somewhat loamy (clayey). If you own a new home, it's ideal to wait 6 to 12 months prior to paving your driveway, to enable the soil to settle naturally. In the case of a repair of this entry, a simple replacement of the Concrete Maintenance layer can be considered if the contractor considers that the present base is sufficient. In both cases, base redone or base preserved, the whole period of its warranty must be exactly the same.

Concrete Maintenance Walker Mill Maryland

The weather conditions in our beautiful province can have a disastrous impact on an asphalt driveway, hence the significance of including a slope with a minimum slope of 2%. This will enable water to drain to the road and minimize the danger of heaving or cracking. This important detail has to be taken into consideration when excavating and preserved during backfilling.

In case you have a van or recreational vehicle, notify the contractor prior to the onset of the job: he is going to have the ability to provide materials accordingly. Some asphalt combinations produce an asphalt that is more immune to heavy duty vehicles.

The asphalt coating should have an initial thickness of 6.35 to 7.6 cm (2.5 to 3 in) in order to accomplish a thickness of at least 5 cm (2 ) after being compacted. For optimum stability, the base should extend across the surface to be paved by roughly thirty centimeters (a couple inches) on each side. Also mention that the setup of side supports around the foundation is a fantastic method to prevent potential cracks and that Concrete Maintenance done in chilly weather is going to be of inferior quality. It's therefore better to await the sunny days to return before beginning work.

A definite contract with your builder in Walker Mill

To avoid unpleasant surprises, choose your contractor and be sure the name and address of his business are written about the contract. The beginning and end dates of the work, in addition to evidence of this contractor's liability insurance and also the technical details of this project to be carried out, should also be included. No contractor should require a deposit before work begins. To prevent the inconvenience that could cause unforeseen expenses, visit the Concrete MaintenanceWalker Mill website. You may thus have all the tools in hand to successfully complete your Concrete Maintenance project.

Concrete Maintenance Walker Mill - Greatest Maryland in Maryland!

For caliber asphalting work , call on Concrete Maintenance, Walker Mill specialist team. We have over 20 decades of expertise in asphalt laying, resurfacing, maintenance and repair. Confirm our Business department to find out the regions served.

Parking Lot Repair And Striping Walker Mill | Snow Removal Walker Mill
Home >> maryland/walker mill >> concrete maintenance
Share this...